This article originally appeared in the November 2006 edition of diversityinbusiness.com

Copyright 2006 by GENLIGHT Por EL, Inc.  All rights reserved.
Unless otherwise noted, all photos and graphic images are copyrighted property of GENLIGHT Por EL, Inc. and may not be used without written consent.  All rights reserved.

 

PRODUCT SAFETY RECALL

Effective: November 28, 2006

The U.S. Consumer Product Safety Commission (CPSC) announces the following recall in voluntary cooperation with the firm below. Consumers should stop using recalled products immediately unless otherwise instructed.

Name of product: Troy-Bilt and Craftsman Brand Gasoline Chain Saws
Units:  About 76,000

Importers:

MTD Southwest Inc., of Tempe, Arizona.
Hazard:

The chain saw's plastic front handle can break during operation. If this occurs, the saw would be difficult to control and poses a risk for lacerations.

Incidents/Injuries: MTD has received two reports of consumers losing control of the saw when the handles broke during use. One consumer reported bruising to his elbow and the other received burns to his fingers after contacting the muffler when the chain saw he was using broke and he lost control of the saw.
Description:

These Troy-Bilt and Craftsman brand chain saws are powered by a two-cycle gasoline engine ranging in size from 46cc to 55cc. They are equipped with either an 18-inch or 20-inch bar.

There are four Troy-Bilt models affected: 41AY00AR966, 41AY60AR766, 41AY90AR766 and 41AY08AR966.

There is one Craftsman "Incredi-Pull" model affected: a 55cc two-cycle gasoline engine with an 18-inch bar and model number 316.350840. The model number of the chain saw is located on the engine casing.

Sold at: The Troy-Bilt brand chain saws were sold at independent retailers, home improvement and hardware stores nationwide from January 2004 through June 2006 for between $200 and $250. The Craftsman brand chain saws were sold at Sears and Kmart stores nationwide from January 2004 through June 2006 for between $190 and $230.
Manufactured in: n/a
Remedy: Consumers should stop using these chain saws immediately, and contact MTD to receive a free service kit with a replacement handle and installation instructions. Sears customers will be mailed a free service kit with a replacement handle and installation instructions.
Consumer Contact:

For more information, contact MTD toll-free at (888) 848-6038 between 8 a.m. and 5 p.m. ET Monday through Friday, or log onto the company's web site at www.troybilt.com - Sears customers should call Sears at (800) 659-7026 between 7 a.m. and 9 p.m. CT Monday through Saturday.

The End


Click to return to top

|     Home     |     News     |     Events     |     Opportunities     |     About Us     |     Contact Us     |     Archives     |